How Much Does a Ton of Gravel Cover Near Murrells Inlet? A Practical Guide

A ton of gravel covers approximately 80 to 100 square feet at 2 inches deep, or 60 to 70 square feet at 3 inches deep, depending on the specific product. Heavier products like crushed limestone cover less area per ton than lighter river rock. C-Scapes Mulch and More in Murrells Inlet can help you calculate exactly how many tons your project needs before you order.

How do I calculate tons of gravel for a landscape project?

Measure length and width in feet, multiply to get square footage, then multiply by your depth in feet (2 inches = 0.167 ft, 3 inches = 0.25 ft). Divide by 27 to get cubic yards. Multiply cubic yards by the density of your stone product, typically 1.25 to 1.5 tons per cubic yard. Example: 600 sq ft at 2 inches = 600 x 0.167 = 100.2 cubic feet / 27 = 3.7 cubic yards x 1.35 = approximately 5 tons. Round up by 10 percent as a buffer.

What is the right gravel depth for different applications?

For decorative beds and borders, 2 inches over a fabric barrier provides good weed suppression. Three inches is better for drainage swales. French drain trenches need 6 to 8 inches around the perforated pipe. Driveway gravel needs a minimum of 4 inches of compacted crushed stone.

Is bulk gravel cheaper than bagged?

Yes, significantly. Bulk stone from a landscape supply yard is typically 50 to 75 percent less expensive per square foot than equivalent bagged stone from a home improvement store. For any project over a few dozen square feet, bulk purchasing pays for itself. See our stone comparison guide and our stone selection page.